Action
-
Remove the Thermostat from the Wall:
- Press the tab underneath the thermostat to remove it from the wall.
-
Remove a Battery:
- Remove one battery from the thermostat and leave it out.
-
Reinsert the Battery:
- Put the battery back into your thermostat.
-
Reattach the Thermostat:
- Place the thermostat back on the wall.
- The thermostat should then display a 'Reconnecting' message.
-
Turn On the Heating:
- Turn the dial on the front of the thermostat and press it in to raise the target temperature above the room temperature shown on the thermostat.
-
Check for Success:
- If successful, you’ll hear the boiler fire up, indicating that Hive has asked the boiler to turn on.