Resetting Your Hive Light Following Repositioning

Now that you have moved your Hive Light, it may need to be reset again. To do this, follow these simple instructions:

1. Power Cycle the Light

   • Turn the light off and on six times using the light switch or mains powered socket.
   • On the sixth time, leave the light on.

2. Enter Reset Mode

   • The light should flash twice, indicating that it is now in reset mode.

3. Open the Hive App

   • Launch the Hive app on your device.
   • Navigate to Manage > Install a Device > Install Hive Devices > Other Hive Devices > Start.

4. Search for Devices

   • The hub will begin searching for devices. When it finds your Hive Light, the light should flicker.

5. Complete the Reset

   • To stop the hub from searching, simply back out of the page. Your devices should now show as online.