Skip to content
Self Service

Reconnecting your Hive Nano 3 Hub to Wi-Fi

Created on Wed Jan 15 11:31:15 UTC 2025 | Last modified on Thu Jan 16 07:50:28 UTC 2025

  • Back
  • PDF
  • Print
  • Share
    • Facebook
  • Copy To Clipboard
  • Collapse All Expand All

Action

Follow these steps to reconnect it to your Wi-Fi network:

  1. Open the Hive App: Launch the Hive app on your mobile device.
  2. Select the Offline Hub: Tap on the offline Hive Hub Nano3 from the list of devices.
  3. Change Wi-Fi Settings: Tap on "Change Wi-Fi" and follow the in-app Wi-Fi setup wizard to reconnect your hub to the network.

 TIP: Ensure Bluetooth is switched on and is enabled for the Hive App in your phone's settings. 

 CAUTION: Do not use a VPN while re-connecting your Nano3 Hub to Wi-Fi. 

Bluetooth Unstable Troubleshooting
  1. Avoid Interference
    • Make sure the hub is not placed near other electrical or wireless devices, as they can interfere with the signal.
  2. Move Closer
    • Bring the device closer to the hub to improve the connection.
  3. Restart Bluetooth
    • Turn Bluetooth off and then back on and re-attempt the onboarding process.

Next Steps

Has following the Change Wi-Fi steps on the Hive App resolved your issue?

Audit History

Add notes here if prompted.