- Check the Power Connection: Ensure the power cable is securely connected to the back of the hub and the main power socket.
- Test Another Power Socket: Try plugging the hub into a different mains socket in your home to rule out the possibility of a faulty socket.
- Reboot Your Nano2 Hub: Unplug the power supply from the mains socket and disconnect the cable from the back of the Nano2 Hub. Then, plug them back in.
- Check for Lights: You should now see an illuminated light on the hub. The light should normally flash green for a few minutes and then go solid green.
-
Verify Online Status: Your device should now show as online.
Has this resolved your issue?
Look Ahead