Reset Your Hive Radiator Valve

To reset your Hive Radiator Valve, follow these steps:

Step-by-Step Guide

1. Remove a battery (see below for images of how to do this):

   • Press the tab on the Hive Radiator Valve.
   • Slide the casing off.
   • Remove one battery.

2. Hold the Button:

   • Press and hold the button located below the screen.

3. Reinsert the Battery:

   • While still holding the button, put the battery back into the Hive Radiator Valve.
   • Continue to hold the button for 5 seconds. The display will flash, and then all segments should light up. Remove your finger at this point.

4. Use the App:

   • Open the app and navigate to: Manage > Install devices > Hive Active Heating > Radiator Valve > Get Started.

5. Hub Searching:

   • The hub will start searching for devices. When found, the valve screen should return to the normal display.

6. Stop the Hub:

   • Stop the hub from searching by backing out of the page. Your devices should now show as online.