Setting Up Your Hive Plug

Answer

 NOTE: Hive Plugs are self-installation only. 

Setting up Hive Plugs is straightforward, but it’s best to do it one plug at a time. Here’s a step-by-step guide to help you get started:

For New Hive Users:

  1. Set Up Your Hub:
    • Log in to the Hive app, select Install Hub and
      follow the steps to connect by WiFi (if you have a Nano3 model) or by
      Ethernet cable.
  2. Set Up Your Hive Plug:
    • Plug In: Insert your Hive Plug into a mains socket and switch it on. It will flash amber while searching for your hub.
    • Open the Hive App: Go to 'Manage' and tap 'Add a device'. Then select 'Other Hive devices' and follow the steps. 
    • Save and Confirm: Once the plug appears on the screen, save it. The LED light will stop flashing, indicating it’s connected.

For Existing Hive Users:

  1. Log In:
    • Access Your Account: Log in to your account using the Hive app with your username and password.
  2. Install Devices:
    • Open Dashboard: Navigate to the main Dashboard.
    • Tap ‘Add’ at the bottom of this page.
    • Tap ‘Add a device’.
    • Follow Instructions: Follow the on-screen instructions.
  3. Set Up Your Hive Plug:
    • Plug In: Insert your Hive Plug into a mains socket and switch it on. It will flash amber while searching for your hub.
    • Open the Hive App: Go to 'Manage' and tap 'Add a device'. Then select 'Other Hive devices' and follow the steps. 
    • Save and Confirm: Once the plug appears on the screen, save it. The LED light will stop flashing, indicating it’s connected.

By following these steps, you can easily set up your Hive Plug and integrate it into your smart home system.